Skip to main content
Laval & area concrete contractor · Free written estimates
(450) 233-4954

Residential · Floors

Polished, Epoxy & Stained Concrete Floors in Laval

A concrete floor is built to last, needs no carpet or grout, and works in kitchens, basements, sunrooms and open living areas. We start with a flat slab, then polish, coat with epoxy, stain or overlay it with a micro-topping. Every project gets a free written estimate and a firm finish date.

  • Polished, epoxy, stained or micro-topping
  • New slabs or over existing concrete
  • Free written estimate, firm finish date

The foundation matters

Why Concrete Floor Prep Comes Before the Finish

A polished, epoxy, stained or micro-topping concrete floor is only as good as what sits underneath it. Any lippage, hollow spots or surface irregularities will show through the finish, no matter how well it is applied.

That is where self-leveling underlayment enters the picture. We pour a layer that brings an uneven or patched slab into spec before any finish goes down. If you are planning radiant heat in the floor, the tubing gets encased in the same underlayment step, so the heat sits between the slab and the finish.

Once the base is flat and sound, we can take the floor in any direction: a mirror-bright polished concrete finish, a seamless epoxy coating, a warm stained concrete surface, or a thin micro-topping overlay that gives tired concrete a new face without a tear-out.

Recent work
polished concrete floor in a modern Laval kitchen
polished concrete floor reflecting light in a Laval living room

The sequence

How a Concrete Floor Gets Built in Laval

  1. Inspect the slab

    We look at the existing concrete for moisture, cracks, flatness and any old coatings, then talk through which finish makes sense for the room and the slab condition.

  2. Prep the surface

    We grind or shot-blast to remove old finishes and contaminants, fix any cracks or damage, and pour self-leveling underlayment where the slab is out of spec.

  3. Build the finish

    We apply the chosen finish, polish, epoxy, stain or micro-topping, following the manufacturer system from primer through topcoat, building proper thickness in each coat.

  4. Cure and handoff

    The finish cures per spec, we walk the floor with you, and you get the care and maintenance steps that keep a concrete floor looking new for decades.

Finish selection

Picking the Right Floor Finish for Your Space

The room and your lifestyle guide the finish choice. A polished concrete floor shines in open-concept living areas and basements, hard and bright and easy to wipe clean, while an epoxy coating gives a seamless, chemical-resistant surface for utility rooms and workshops.

For warmth and visual depth, stained concrete uses acid or water-based dyes to add colour to the slab itself, perfect for kitchens and sunrooms where you want character without grout lines. A micro-topping overlay is the answer when the existing slab is sound but dated, a thin, seamless new surface that hides what was underneath.

Compare floor finishes
polished concrete floor in a luxury Laval living room
6 Floor finishes
Decades Service life
4.9★ Homeowner rating

Common questions

Concrete Floor Questions Answered

Finishes, prep, cost and what concrete floors are like to live with in Laval.

We finish concrete floors polished, epoxy-coated, stained or with a micro-topping overlay, plus the self-leveling and heated-floor underlayment prep that goes underneath them.
Yes. Most residential floor work is done over an existing slab. We assess it for moisture, cracks and flatness, grind or repair as needed, and pour self-leveling underlayment if the surface is out of tolerance before the finish.
They are no colder than tile and pair well with radiant heat encased in heated-floor underlayment. They are hard, which is also why they are durable, low-maintenance and allergen-free, with no grout lines or carpet to hold dust.
Concrete floor finishes generally run $6 to $15 per square foot depending on the finish, the slab condition and how much prep or underlayment is needed. We confirm it with a written, itemised quote after seeing the slab.
We grind or shot-blast the surface and pour self-leveling underlayment where the slab is uneven. A finish only looks as good as the slab under it, so flat comes before anything decorative.

Homeowner reviews

What Laval Homeowners Say About Their Concrete Floors

★★★★★ 4.9 · 87 reviews on Google
Read all reviews →
★★★★★

Polished the whole main floor after a reno. It is bright, dead easy to clean, and the self-leveler they poured first means there is not a single high spot.

V. S.
Laval
★★★★★

Epoxy floor in the basement utility room. Seamless, wipes clean, and they built it up in proper coats instead of one quick layer.

D. A.
Longueuil
★★★★★

Stained the kitchen floor a warm brown. The colour has depth you do not get from tile, and there are no grout lines to scrub.

M. R.
Terrebonne
★★★★★

Micro-topping over an old cracked slab in the sunroom. New seamless surface for a fraction of a tear-out, and you cannot tell what was underneath.

E. T.
Repentigny

Ready to start

Get a Free Concrete Floor Estimate

Describe the room and the finish you are thinking about, we will assess the slab, recommend the right prep and system, and send you a written, itemised quote.

We'll assess the slab and send a written floor quote within one business day.