Every path needs to shed water, resist freeze-thaw cycles, and stay safe underfoot. We pour concrete sidewalks and walkways on solid bases with proper cross-slope and slip-resistant finishes. New installations, decorative upgrades, and repairs all backed by a free written estimate.
Why Concrete Walkways Fail (And How We Prevent It)
A path that looks flat can still trap water. When meltwater pools instead of draining, it freezes overnight and becomes a slip hazard. A slab without proper base preparation heaves and cracks under freeze-thaw stress. And a smooth finish, no matter how attractive, turns slippery when wet.
We start with a compacted granular base and set a deliberate two-percent cross-slope so every drop runs off. The concrete is finished broom-rough for traction, and control joints are cut on a grid to manage seasonal movement. When an older path has heaved or cracked but the base is still sound, concrete walkway repair can re-level and patch it without a full replacement.
For paths that are also design features, stamped concrete or exposed aggregate finishes tie the walkway to the patio and driveway. We match colour, pattern, and texture so the new slab reads as one continuous yard surface.
Recent work
From site to finish
How We Build a Concrete Walkway in Laval
Survey the route and grade
We walk the path with you, measure the width and length, and determine the slope direction so water runs away from the house and other structures.
Prepare the base
The area is excavated to depth, a compacted granular base is laid, and wooden or metal forms are set to the finished slope and height.
Place and finish the concrete
The mix is poured, screeded level, and finished with a broom for traction or stamped and sealed if decorative.
Cut joints and cure
Control joints are cut on layout to manage movement, the slab is cured per schedule, and it is tied cleanly into adjacent steps or driveways.
Aesthetic and functional
When a Concrete Walkway Becomes a Design Feature
A plain broom-finish path does the job, but a walkway is also the visual line that connects your front entry to the back gate. A decorative walkway in stamped or exposed-aggregate concrete elevates that line into a landscape element.
We match the finish and colour to your existing driveway, patio, or steps so the new slab feels like it was always part of the yard. If an older path is heaved or cracked but the base is still solid, walkway repair can re-level and resurface it for a fraction of the cost of a tear-out and new pour.
Slope, finishes, drainage and repair for sidewalks and walkways in Laval.
A slight cross-slope, usually around two percent, lets rain and meltwater run off instead of pooling and then freezing. A flat or back-sloped path becomes an ice hazard every thaw, so we build the slope into the base and forms.
A broom finish is the standard for traction. Decorative walkways in exposed-aggregate or textured stamped concrete also stay grippy wet, while a smooth trowel finish does not and is not used outdoors.
Yes. We match the finish, pattern and colour to the driveway, patio or steps already in place so the new sidewalk reads as part of the yard, not a patch.
Often, yes. If the base is still sound, concrete walkway repair can re-level, patch or resurface the path for far less than a full tear-out. We confirm the base on a free visit before recommending either.
Most walkways are placed in a day. You can walk on it within 24 to 48 hours, with the exact timing in the cure schedule we hand over. Decorative finishes are sealed once the slab has cured.
Homeowner reviews
What Laval Homeowners Say About Their Concrete Walkways
Whether you need a new path, a decorative upgrade, or repair on a heaved slab, tell us the route and the finish you want and we will schedule a free site visit with a written, itemised quote.
