Call (450) 233-4954 or send your details through our contact page. We set up a free on-site visit, measure the work, and send a written, itemised quote with a firm price and date, no obligation.
Driveways & Patios
Floors & Foundations
Floors & Flatwork
Sites & Facilities
Floors & Coatings
Facilities We Serve
Concrete FAQs
Concrete FAQs in Laval Driveways, Floors & Foundations
The questions Laval homeowners and businesses ask us most, sorted by category, residential, commercial and industrial, plus straight answers on cost, cure time, freeze-thaw and keeping concrete looking new. Don't see yours? Call and we'll walk you through it.
- Free written estimates, no pressure
- Licensed and insured Laval crews
- Residential, commercial and industrial
Estimates & Getting Started
Estimates, Booking & What to Expect
Quotes, scheduling, coverage and warranties for Laval concrete projects.
Yes. The site visit, measurement and written quote are free with no obligation to book. You only commit once you approve the written estimate.
We work across Laval and the surrounding communities. If you're just outside the city, call us with your location and we'll confirm coverage and any travel considerations.
Yes. We pour single residential driveways and patios as well as large commercial floors, parking and industrial slabs. The estimate process is the same for all sizes.
Booking a few weeks ahead is ideal in peak season (late spring to early fall), since the pour calendar fills up. Smaller repairs can often be slotted in sooner, call and we'll give you a realistic date.
Yes, we carry liability insurance and work to Quebec code. We're happy to confirm coverage details before a project starts.
Workmanship is backed in writing, and product-specific finishes (like epoxy or sealers) carry the manufacturer's system warranty when installed to spec. Exact terms are stated on your written estimate.
Terms are set out clearly on the written estimate before work begins, typically a deposit to schedule and the balance on completion. We confirm everything up front so there are no surprises.
Often, yes. For commercial and industrial sites we can phase pours or work off-hours to limit downtime. Tell us your constraints and we'll build them into the plan.
Residential Concrete
Residential Concrete FAQs
Driveways, patios, garage floors, foundations and finishes for Laval homes.
It depends on size, thickness, base prep and finish, a broom-finish slab sits at the lower end and stamped or coloured work at the higher end. We give a free written, itemised quote for your exact driveway.
Most residential driveways are formed and poured within a few days once the base is ready, then need curing time before use. Weather and size shift the schedule, your written estimate gives a firm window.
Foot traffic is usually fine after 24-48 hours; wait about seven days for vehicles and up to 28 days before heavy loads, so the slab reaches full strength.
Broom finish is the durable, affordable standard. Exposed aggregate and stamped concrete add decoration; all are built on a compacted base with an air-entrained mix for freeze-thaw.
Yes. We build patios, pool decks and outdoor-living slabs in plain, exposed-aggregate or stamped finishes designed for slip resistance and winter durability.
Yes. We install epoxy, polyaspartic and polished garage floors over properly prepped concrete so the coating bonds and resists hot tyres, salt and oil.
We handle foundation repair, crack repair, waterproofing and new foundation pours. We'll tell you honestly whether a repair or a replacement is the better long-term call.
Yes, sealing protects against water, salt and freeze-thaw and keeps decorative finishes looking new. We recommend a sealing schedule for your specific finish, see our care guide.
We get as close as possible on colour and texture, but exact matches are difficult because existing concrete has weathered. We'll set realistic expectations before starting.
Commercial Concrete
Commercial Concrete FAQs
Floors, parking, site concrete and downtime for Laval businesses.
We pour and finish commercial floors, parking lots and structures, loading docks, sidewalks, equipment pads and tilt-up work across Laval.
Yes. We phase pours, work off-hours and use faster-cure systems where suitable so sections of your site stay operational. Share your hours and we'll plan around them.
Polished concrete grinds and densifies the existing slab for a low-maintenance, reflective finish. Epoxy adds a resin coating for chemical and abrasion resistance. We'll match the system to your traffic and cleaning needs.
Yes. We form ADA ramps, curb cuts and accessible sidewalks to the required slopes and detectable-warning standards.
Thickness depends on traffic and loads, light vehicle areas differ from truck and delivery lanes. We spec the slab, base and jointing for your usage and put it in the written quote.
Yes, we handle floor repair, joint repair, spall and crack repair, and resurfacing to extend the life of existing slabs.
Yes. Decorative finishes, polished, stained and stamped, are popular for cafes, showrooms and retail floors that need to look sharp and handle foot traffic.
We coordinate base prep, pour and finish to fit construction schedules, and can arrange ready-mix supply and pumping for tight timelines.
Industrial Concrete
Industrial Concrete FAQs
Warehouse, food-grade, cold-storage and heavy-duty industrial flooring.
We pour and coat warehouse and manufacturing floors, food-processing facilities, cold storage, hangars and more across the Laval area.
It's a combination of slab thickness, mix strength, base prep, joint design and surface hardener so the floor handles point loads and traffic without spalling. See forklift-rated flooring.
Yes. Food-grade epoxy and coved-base systems give seamless, washable, compliant surfaces for processing and prep areas.
Yes. Joint filling with semi-rigid fillers protects joint edges from forklift impact and is a core part of industrial floor maintenance.
Yes. We arrange boom and line pumping to place concrete where trucks can't reach, on tight or elevated industrial sites.
We coordinate ready-mix supply, including standard, specialty and volumetric mixes, matched to the strength and placement your project needs.
Freezer floors need mixes and coatings that perform at low temperatures without cracking or delaminating. We spec systems built for thermal cycling.
Often we can phase work and use rapid-cure coatings so part of the facility keeps running. We'll plan the sequence around your production schedule.
Curing, Care & Materials
Concrete Care, Curing & Materials FAQs
Cure times, sealing, cracking, winter care and the products we install.
Concrete is walkable in 24-48 hours and reaches most of its strength by about 28 days. We schedule traffic and loading around the cure so the slab performs long term.
All concrete moves, so we control where it cracks with a compacted base, correct thickness, an air-entrained mix and control joints cut at the right spacing, keeping cracks to fine, planned lines rather than random ones.
It varies by finish and exposure, but many Laval surfaces benefit from resealing every few years. Our care and maintenance guide lays out a schedule by finish type.
De-icers accelerate freeze-thaw damage and surface scaling, especially on younger or unsealed concrete. We recommend sand for traction the first winter and a quality sealer to protect the surface.
Spalling usually comes from freeze-thaw, de-icer exposure or a finish that trapped water. We assess whether resurfacing or replacement is the right fix, see repair options.
Yes, using cold-weather practices, heated enclosures, blankets and mix adjustments, but we'll tell you honestly when waiting for warmer ground gives a better long-term result.
Reseal on schedule, rinse off salt and de-icer, avoid metal-edged plows on stamped or coloured surfaces, and address small cracks early. Full routine is in our care guide.
"Type" refers to the mix and strength; "finish" is the surface treatment (broom, exposed, stamped, polished). Our concrete types guide explains how to choose for a Laval project.
Ready to start
Still Have a Concrete Question?
Call (450) 233-4954 or request a free estimate and we'll answer your questions and put a written, itemised quote together.
We reply to estimate requests within one business day.