Integrated Mapei Concrete Systems for Laval Floors
Mapei builds product families where each layer bonds to the next, eliminating the weak points that cause floor failures. We install Mapei self-leveling, waterproofing and repair adhesives as a complete system, not as separate products. From substrate prep through final cure, every step follows the Mapei specification. Call for a free written estimate.
Why Integrated Mapei Systems Outperform Mixed Brands
A concrete floor is only as strong as its weakest bond line. When you mix primers, levelers and adhesives from different manufacturers, you are betting that products engineered separately will work together. Mapei eliminates that gamble by designing every product to bond to the layer above and below it.
Our Laval crews use Mapei Ultraplan and Novoplan to flatten renovation slabs for tile, vinyl or wood. Mapei waterproofing membranes handle wet rooms and basements, bonding directly into the Mapei adhesive system that holds the finish. When concrete needs patching, Mapei repair mortars restore the slab to performance spec.
We measure moisture, check for cracks and determine what finish will go on top. This tells us which Mapei product family fits the job.
Mechanically profile and prime the concrete
The slab gets ground or shot-blasted to the Mapei spec, moisture-tested, and primed with the Mapei primer matched to that product line.
Mix and apply the Mapei body
Self-leveling, waterproofing or repair goes down at the water ratio and temperature the Mapei spec calls for, not guessed at.
Cure and document the install
Each layer cures on the Mapei schedule. We photograph the work and keep the data sheets so your warranty is clear.
System thinking
Layer Boundaries Are Where Concrete Floors Fail
Most floor problems start at a bond line. The primer does not grip the slab, the leveler does not stick to the primer, or the tile adhesive does not bond to the waterproofing. Choosing a single product family removes these variables because every layer is engineered to bond to the one below.
Self-leveling, waterproofing, system compatibility and what Mapei does best in Laval.
Mapei Ultraplan and Novoplan are tested, predictable products with deep installer support. They pour to a flat, sound surface that takes a finish without telegraphing the slab below, which is exactly what a renovation needs.
Yes, that is one of its strengths. Mapei waterproofing membranes are designed to bond into Mapei thinset and tile adhesives, so the wet-area floor is one continuous system instead of a stack of unrelated layers.
Because every layer boundary is a place where bond failure can happen. Using a single product family means primer, leveler, waterproofing and adhesive are engineered to work together, removing the surprise bond issues.
Yes, when prep is done right. Mapei repair and adhesive products bond patched and existing concrete back to performance spec when the substrate is mechanically profiled and primed correctly.
Yes. We install the published Mapei system, primer, body, finish, in the correct sequence and at the temperature and mix ratio the spec calls for, so the product warranty stays intact.
Tell us about your renovation floor, wet-room waterproofing or concrete repair, and we will spec the right Mapei products and send a written quote within one business day.
