Skip to main content
Laval & area concrete contractor · Free written estimates
(450) 233-4954

Mapei · Waterproofing

Wet-Room Waterproofing with Mapei Membranes in Laval

Mapei waterproofing starts with Mapelastic membrane and finishes with Mapeflex joint detail at every corner, drain and transition. We install the complete system, not shortcuts. Balconies, shower enclosures, below-grade slabs, and exterior decks all get the matched primer, field application, and protection layer Mapei specifies. Call for a free written estimate.

  • Mapei-certified installer
  • Membrane plus joint detail
  • Free written estimate, firm schedule

Why the system matters

Mapelastic Membrane Needs Mapeflex Detail to Work

A membrane alone cannot seal a corner. Mapelastic covers the field, but Mapeflex tapes, sealants and transition products handle every joint, penetration and edge. Skipping Mapeflex detail is the most common failure mode in waterproofing installs. We never do it.

On tile-coordinated projects where the same Mapei brand runs through adhesive, grout and waterproofing, the warranty path stays clean and the installer's liability is clear. We coordinate with Mapei repair products and Mapei SLU to deliver the full Mapei flow.

If the project calls for Sika waterproofing or Ardex waterproofing instead, we install those systems with the same rigor. The principle is the same: complete system, no shortcuts.

Recent work
Mapelastic membrane applied to a Laval wet-room substrate
Mapeflex detail tape at a corner joint in a Laval project

Installation sequence

How Mapei Waterproofing Gets Installed in Laval

  1. Assess and spec the system

    We evaluate the substrate, application (wet room, balcony, below-grade), and any tile-trade coordination. The right Mapei product (Mapelastic Smart, AquaDefense, etc.) and Mapeflex detail products are confirmed in writing.

  2. Prepare the substrate

    Concrete is cleaned, cracks are repaired with compatible Mapei repair product, and joints are isolated with Mapeflex tape or sealant. The surface is ready for primer and membrane.

  3. Prime and apply membrane

    Mapei primer is applied per spec, then Mapelastic membrane is mixed and rolled or sprayed to engineered thickness. Mapeflex detail is installed at every corner, drain, and penetration as the field is laid.

  4. Cure and finish

    The system cures per Mapei schedule. Protection layer (tile adhesive, traffic coating, or curing compound) is applied per project spec. The waterproofing is handed off ready for service.

The detail is the system

Mapeflex Joint Detail: Where Waterproofing Actually Holds

Every corner, drain, pipe penetration and substrate transition gets Mapeflex tape or sealant. This is not optional. The field membrane alone fails at joints because concrete moves, substrates meet at angles, and water finds the path of least resistance. Mapeflex is engineered to stop it.

See our broader brand specialty work and coordinate with other Mapei services on multi-product projects.

Request Mapei quote
Completed Mapei waterproofing system in a Laval installation
Membrane + detail Complete system
Every joint Mapeflex coverage
Free Written estimate

Common questions

Mapei Waterproofing Questions Answered

Membrane vs detail, tile coordination, balcony use, below-grade, timeline.

Mapelastic is the field membrane; Mapeflex is the joint-detail family (tapes, sealants, transition products) that completes the system. Both are needed; using Mapelastic alone fails at the corners.
Often yes, especially when the tile installer is using Mapei adhesive and grout. The whole-system Mapei path keeps warranty paths clean. We install to that integration.
Yes, with the right Mapei system for the deck conditions. We confirm the spec, install with traffic-rated protection where required.
Yes, Mapei has below-grade systems. For most residential foundation work, see also foundation waterproofing for the non-brand-specific service.
Depends on area and detail count. Most projects take a few days through cure; large-scope work stretches longer. The schedule is in the quote.

Client reviews

What Laval Clients Say About Mapei Waterproofing

★★★★★ 4.9 · 87 reviews on Google
Read all reviews →
★★★★★

Full Mapei system on a tile shower install, my adhesive went over it cleanly, warranty path intact for the whole assembly. Trade-coordinated install.

Z. C6
Tile Contractor, Laval
★★★★★

Balcony waterproofing with Mapei system including the traffic-bearing protection. Two seasons in, dry below, surface holding. Real outdoor performance.

Y. C6
Custom Home Builder, Montreal
★★★★★

Mapelastic plus full Mapeflex detail on every wet room across a building. Inspector signed off on the system warranty; documentation was complete at handoff.

Q. C6
Property Developer, Terrebonne
★★★★★

They never skipped the Mapeflex joint detail to save time, which is what every other contractor I have used does. The result is the difference.

X. C6
Renovation Contractor, Longueuil

Ready to start

Get a Free Mapei Waterproofing Quote

Describe the waterproofing application, substrate type, and any tile-trade coordination. We will spec the matched Mapei system and send a written quote within one business day.

We'll assess and send a written quote within one business day.