Metallic epoxy transforms a concrete slab into a living surface where pigment swirls create depth that shifts with the light. Laval Concrete applies the system in layers: prep, primer, then a clear body coat infused with metallic pigment that our crew moves and works to form the marbled effect, sealed under a protective topcoat that resists hot tires, salt spray and impact. Every project includes a free written estimate and firm completion date.
How Metallic Epoxy Differs from Solid-Colour Coatings
When you choose a standard epoxy garage floor, the colour is uniform across the slab. Metallic epoxy takes a different path: the installer mixes metallic pigment into a clear base coat and applies it with rollers, brushes and air movement, allowing the pigment particles to float and settle unevenly, creating swirls, clouds and visual depth that no two floors will replicate identically.
The technique demands skill and timing. Temperature, humidity, and the installer's hand all influence the final pattern. The result is a one-of-a-kind finish that reads as three-dimensional, catching light from different angles throughout the day. Underneath remains a professional concrete coating system: slab prep, primer, the metallic body, and a clear topcoat for durability.
Want to compare options? Polyaspartic coatings can also be applied as metallic with faster cure times. Polished concrete skips coating entirely and densifies the slab itself. If an old coating has failed, garage floor repair strips and rebuilds the system from the ground up.
Recent work
Installation process
Four Stages to Your Metallic Epoxy Garage Floor
Sample selection and test area
We bring metallic pigment sample boards to your garage in natural light. You select a colour or blend, and we apply a small test section so you see the exact look before committing to the full floor.
Slab preparation and priming
The concrete is mechanically ground to the correct profile, cleaned, moisture-tested, and primed with the matched primer for the metallic system. This foundation ensures adhesion and durability.
Metallic body coat application
The clear body coat is mixed with your chosen metallic pigment and applied to the floor. Our crew uses rollers, brushes and air movement to work the pigment, creating the swirled, three-dimensional marbled effect.
Topcoat curing and handoff
Once the metallic body cures, a tough clear topcoat is applied to lock in the finish and protect against hot tires, salt, and impact. The floor then cures for full traffic and load capacity.
Finish options
Metallic Epoxy Versus Other Garage Floor Systems
Standard epoxy with broadcast flake is the budget-friendly choice; metallic epoxy is the premium aesthetic. Both are professionally installed coatings with the same rigorous slab prep. The metallic body coat is what creates the showroom-quality three-dimensional look.
Polyaspartic can be applied as a metallic system as well, with the advantage of faster cure and UV stability. Polished concrete takes the opposite approach, removing the coating entirely and densifying the slab itself for a natural stone appearance. When a previous coating has peeled or failed, garage floor repair removes the old system and installs a new one correctly.
Colour consistency, durability, cost and slip resistance answered for Laval homeowners.
Metallic epoxy is variable by nature, the look depends on installer technique, pigment blend and conditions on the day. The sample shows the colour and style; the final floor will be in that family but uniquely yours.
Yes, because the topcoat over the metallic body is the same tough garage-grade topcoat used on standard epoxy. The metallic body coat sits below the topcoat, so impact, hot tires and salt hit the topcoat first.
Metallic carries a premium over standard epoxy because of the pigment, the body-coat technique and the installer time. We quote both side by side so you can compare for your garage.
Most colours and many multi-colour blends are available, blues and greens, warm earth tones, monochrome whites and greys, and combinations. We bring sample boards and recommend blends that suit garage use and read well across a large floor.
Not when finished for the use. The topcoat can include slip-resistant aggregate broadcast into the surface, giving traction even when the floor is wet or splashed.
Homeowner reviews
What Laval Homeowners Say About Their Metallic Epoxy Floors
Metallic epoxy in a deep blue blend across the shop garage. The depth catches the lights and looks like a showroom, but it handles dropped wrenches and brake fluid just fine.
T. R.
Laval
★★★★★
They did a small test area first so we could see how the metallic moved before committing. Final floor is exactly the look we picked, just at full scale.
J. N.
Repentigny
★★★★★
Marbled monochrome whites and greys. Looks like polished marble until you realise it is concrete. The topcoat has shrugged off a winter of salt without losing the gloss.
E. N.
Longueuil
★★★★★
Bought a sports car after the floor went in and the garage finally felt worthy of it. Compliments every time someone visits.
B. M.
Terrebonne
From the blog
Concrete Guides & Articles
Practical reading on planning, finishes and caring for concrete in Laval.
Bring us your colour preferences or let us recommend a blend that suits your space. We will visit your garage, show samples in natural light, and deliver a written, itemised quote within one business day.
