Industrial Floors Built with BASF MasterTop in Laval
When a warehouse, manufacturing plant, or food facility needs a floor coating that performs under real-world stress, MasterTop delivers. Laval Concrete applies the full BASF MasterTop range, from standard epoxy for moderate traffic to urethane cement for chemical and thermal extremes. Every installation follows BASF spec, which is how the system warranty becomes real.
Choosing the Right MasterTop Coating for Your Facility
Not every floor needs the same coating. A distribution center with steady forklift traffic has different demands than a food processing plant with washdown cycles and chemical exposure. MasterTop spans the range: standard epoxy for light-to-moderate use, high-build epoxy for heavy traffic, urethane cement for severe chemical or thermal conditions, and decorative systems for retail showrooms. The slab itself also matters, moisture, existing damage, and substrate prep all factor into which MasterTop formulation will perform.
We start by assessing the actual facility conditions: what moves across the floor, what spills on it, temperature swings, humidity, slip requirements, and any regulatory compliance needs. From that assessment, we recommend the matched MasterTop system and walk through the prep and install timeline.
We evaluate traffic patterns, chemical exposure, thermal cycling, slip requirements, and any regulatory needs. From that, we select the matched MasterTop system and confirm the install schedule.
Prepare the slab to spec
The concrete is diamond-ground to the BASF profile, contaminants and old coatings removed, cracks repaired with BASF-compatible materials, and the surface primed with the matched MasterTop primer.
Apply MasterTop in layers
The system is applied in sequence: primer, body coat, aggregate broadcast where specified, topcoat at engineered thickness. Each layer cures per BASF spec before the next is applied.
Document and hand off
The install is documented with material specs, batch records, and cure schedule. The floor is handed off with maintenance protocol and BASF system warranty paperwork in your file.
Why BASF spec matters
System Warranty Depends on BASF-Spec Installation
MasterTop system warranty is not a product warranty. It is a system warranty that covers the entire installation, prep, primer, application thickness, cure schedule, and topcoat. When we install to BASF spec, the warranty extends to install integrity. Substituting components, mixing off-ratio, or skipping prep steps voids the warranty. That is why we follow the protocol exactly.
System range, facility match, warranty and BASF spec compliance.
Based on the facility use: traffic load, chemical exposure, thermal cycling, slip rating, decorative requirements. We assess the actual conditions and recommend the matched system from the BASF range.
Yes, for severe environments (food processing, breweries, freezer floors, chemical-aggressive zones) MasterTop has urethane cement formulations. Standard epoxy MasterTop handles moderate environments.
Yes when installed to BASF spec by a BASF-system installer. System warranty extends beyond product to install integrity, which is the value over generic product warranty.
Yes, by zone-phased install. Each zone is offline during install and cure with operations routed around the work zone. Phasing is built around your operations from quote stage.
Per zone, typically a week including cure before service. Facility-wide projects stretch with phased install. Full schedule in the quote.
Client reviews
What Laval Facilities Say About MasterTop Performance
MasterTop urethane cement in our chemical exposure zone. Three years of operation, no degradation, BASF warranty in our file. The brand discipline pays off.
Z. H6
Plant Manager, Laval
★★★★★
High-build MasterTop across our warehouse zones. Forklift traffic for two years, no spalling at the joints, no surface wear. Right system for the use.
Y. H6
Distribution Director, Montreal
★★★★★
BASF-spec install with documentation. The system warranty paperwork came at handoff, supporting our facility records and any future audit need.
Q. H6
Facility Director, Terrebonne
★★★★★
They matched the MasterTop system per zone in our multi-use facility instead of one system everywhere. Better outcomes, smaller total cost. Real engineering match.
X. H6
Operations Lead, Longueuil
From the blog
Concrete Guides & Articles
Practical reading on planning, finishes and caring for concrete in Laval.
