Clinics, hospitals, dental practices, and diagnostic labs need concrete floors that stop bacteria at the surface. Seamless epoxy and urethane systems with integrated cove base eliminate the seams and wall gaps where pathogens hide. Antimicrobial chemistry in the topcoat resists biological growth. Laval Concrete installs these systems to meet infection-control codes. Free written estimate, firm schedule.
Standard commercial floors have seams, grout lines, and a baseboard-to-wall gap. In a medical setting, those gaps are where bacteria survive cleaning. The solution is a monolithic concrete floor system poured seamlessly and extended as a cove base up the wall, eliminating every crevice in the cleaning zone.
The material is typically an epoxy or urethane resin with antimicrobial additive mixed into the topcoat. When applied across the entire floor and cove in one continuous pour, the result is a surface that disinfection chemicals can reach completely. No seams to trap moisture or biological matter. No wall junction to hide pathogens.
We meet with infection control and facilities staff to map the building by zone (procedure rooms, exam areas, corridors, support spaces) and determine which zones need which antimicrobial system based on cleaning protocols and patient contact.
Grind slab and prepare wall junctions
The existing concrete slab is diamond-ground to the proper profile for adhesion, cracks are sealed, and the wall-floor junction is cleaned and primed. Cove base material is staged and ready to integrate during the pour.
Pour seamless floor with integrated cove
The epoxy or urethane system with antimicrobial additive is applied in one continuous pour across the floor and up the wall as a cove base, creating a monolithic surface with zero seams in the cleaning path.
Cure and hand off disinfection protocol
The antimicrobial topcoat cures to full strength, the floor is inspected, and the housekeeping team receives documentation on compatible disinfection chemicals, scrubbing equipment, and maintenance frequency.
The critical detail
Cove Base Eliminates the Bacteria Trap
The wall-floor junction is the highest-contamination zone in any medical facility. A traditional baseboard leaves a gap, however small, where bacteria accumulate and survive cleaning. Cove base is a curved transition that flows from the floor up the wall in one continuous piece of cured material, with no gap, no seam, no hiding place.
When a disinfection mop or auto-scrubber reaches the wall, it rolls across the cove without interruption. The entire surface can be wiped clean in one motion. This is the single most important detail in a medical floor and the one most often omitted on budget bids. We include it on every project. Coordinate with commercial concrete flooring work and broader commercial services in mixed-use buildings.
Seamless systems, cove base, antimicrobial chemistry and infection-control protocols.
Three things: seamless install across the cleaning path, integrated cove base up the wall, and antimicrobial chemistry. All three together support real infection control; missing any one creates the crevice or chemistry gap that bacteria exploits.
Yes. The wall-floor junction is the single highest-bacteria zone in any facility. A vinyl baseboard against a floor has a gap; cove base eliminates it. Infection-control standards require it for procedure and patient-care zones.
Several proven antimicrobial additives integrate into epoxy and urethane systems and inhibit bacterial growth on the surface. We spec the additive based on the facility's infection-control program and the manufacturer recommendation.
Yes, with planning. We zone the install around clinical operations, schedule for low-utilization periods (overnight, weekends, planned closures), and contain dust and odor to keep the rest of the facility operating. Coordination is built into the project plan.
Per zone, typically a few days for prep and install, plus cure before disinfection chemicals can be applied. Whole-facility projects stretch across weeks with careful zoning. The full schedule is in the quote.
Client reviews
What Laval Medical Facilities Say About Their Floors
Seamless install with cove base in our procedure rooms. Infection control accepted the spec without revisions, housekeeping team can disinfect the wall transition without a seam slowing them down.
Z. K2
Facilities Director, Laval Clinic
★★★★★
Multiple zones with different antimicrobial systems matched to risk levels. They knew the codes, did the work, passed inspection. Smooth project from spec to handoff.
Y. L2
Hospital Facility Manager, Montreal
★★★★★
Cove base in every operatory, seamless floor across all the rooms. Disinfection takes less time and we trust the result more. Operatory hygiene improved measurably.
Q. L2
Dental Practice Owner, Terrebonne
★★★★★
Chemical-resistant healthcare system that also handles our lab reagents. Two specs in one system, properly engineered. The crew knew exactly what they were installing.
W. P.
Lab Operations, Longueuil
From the blog
Concrete Guides & Articles
Practical reading on planning, finishes and caring for concrete in Laval.
Describe your facility type, zone layout, and infection-control requirements. We will spec systems by zone and send a written quote within one business day.
